| » Manual Block Making Machinery |
|
Concrete block provides an intermediate solution between the advantages of bricks & those of monolithic concrete walls. With the necessary casting facilities it is possible to produce uniform concrete blocks in the required strength in large quantities at rates much faster than clay bricks, depending on sizes, the cost and time of lying are reduced, thereby contributing to the overall economy of the building. |
| |
| Overview |
Output Per Sift |
650 Blocks |
Cycle Hour |
30 |
Ramming Compaction |
Manual |
Block Ejection |
Blocks Are Stationary Moulds Slide Down |
Weight (Approx |
225 Kgs |
Dimension (mm) |
L 1250 X W 1100 X B 1350 |
|
| |
Benefits & Features: |
• Corner breaking of block is solved (previously corner of blocks use to break).
• Output is 450 Blocks / Shift.
• Easy to operate.
• The mould easily slides down. |
|
|
| » Vibro Block Making Machinery |
|
| Overview |
Output Per Sift |
650 Blocks |
Cycle Hour |
40 |
Vibrator |
1 Hp. 1 Ph. / 3 Ph. |
Ramming Compaction |
Manual |
Block Ejection |
Blocks Are Stationary Moulds Slide Down |
Weight (Approx |
225 Kgs |
Dimension (mm) |
L 1250 X W 1100 X B 1350 |
|
| |
| Benefits & Features: |
• The output increased
• Strength of block increased. |
|
|
| » Hydraulic Block Making Machine |
|
| This is an egg laying type machine. This gives a production capacity 16, 10, and 8 nos of blocks per stroke respectively in the sizes of 4 inch, 6 inches and 8 inch. The machine is of high quality due to which the blocks produced in the machinery are also of very good quality. We use very superior quality parts. Heavy type vibrator gives smooth finishing to the blocks, the machine is heavy build so as to avoid any problem during the function of the machine |
| Specifications |
Power |
9 HP, 3 Phase |
Hydraulic Pumps |
5 HP, 1440 RPM |
Vibration (Double) |
1.5 HP 2 Nos. (3 HP 2880 RPM) |
Traveler |
1 HP 1440 RPM |
Weight |
1.3/4 |
Production Rate / 8 Hours |
7680 Nos |
|
| |
|
Size of Moulds |
400x200x100 |
(16x8x4) |
16 Nos |
400x200x150 |
(16x8x6) |
10 Nos |
400x200x200 |
(16x8x8) |
8 Nos |
|
| |
| Benefits & Features |
• Hard Crome Plated Bars
• Heavy Duty Hydraulic System.
• Special Type Control Panel.
• Heavy & rigid Design.
• Heavy Duty Rear Fiber Wheels. |
|
|
| » Auto Ramming Block Making Machine |
|
| Features |
• The machine is provided with a heavy duty vibrator & automatic compacting head.
• The special feature of the machine is the ejection of blocks i.e. the moulds slides down keeping the blocks steady. This downward movement towards gravity makes the ejection very easy & smooth.
• Being portable the machine can be installed very easily on site & does not require any foundation.
• Special feature of the machine is the changeable moulds which can produce solid as well as hollow blocks & can be changed by unskilled labour on site. |
| |
| Specification |
Output Per Sift |
850 Blocks |
Cycle Hour |
60 |
Vibrator |
In Built 1 Hp , 1 Ph/# Ph Motor |
Ramming Compaction |
Automatic 140 Strokes/Min In 2 HP , 1 Ph /3 Ph |
Block Ejection |
Blocks Are Stationary Moulds Slide Down |
Weight (Approx) |
375 Kgs |
Dimension (mm) |
L 1250 X W 1100 X B 1750 |
|
| |
|
|
