| » PLASTIC MACHINERIES - ANCILLARY MACHINES |
|
Hot Air Dryer |
 |
| |
| Models |
LHD30, LHD60, LHD100,
LHD 150, LHD 200, LHD 300, LHD 450
LDL600, LDL 1200, LDL 2000 |
| |
| Hopper capacity in ltr - 30 to 2000 |
| |
Options available |
LHDSeries - Machine Mounted/ Floor mounted
LHL Series - Only Floor mounted
LHL Series - Casted bins on request
|
• Energy efficient
• Compact and light weight
• Fully insulated aluminum bin with SS cladding
• PID control of temperature
• Large cleaning window for quick material change over . |
| |
| |
|
| Blending Unit |
 |
• Consistent dosing brush less motor
• PLC supported control
• Homogenous dosing quality
• Saving on additives
• Minimum effort for material change-over |
| |
Technical Data |
| |
|
| Dehumidified Air Dryer |
| |
| Models |
LMD50, LMD80, LMD120, LMD160
LMD200, LMD250, LMD 400 |
| |
| Also available |
| Dryers of capacity 500 to 2400 M3/hr (dry air generation) |
| |
| Dry Air capacity in m3/hr - 50 to 2400 |
| |
| Bin size in ltr. - 15 to 3000 and above |
• Continuous supply of dry air to the drying bin
• Closed loop regeneration process
• PLC Control facility to monitor all drying functions
• Large cleaning windows from 100 liter bins
• Integrated conveying versions |
| |
|
| Technical Data |
| |
|
| PET Drying System for Stretch Blow Molding Machines |
| |
| Models |
LMD80, LMD120, LMD160,
LMD200, LMD250, LMD 400
|
| |
| Also available |
Dryers of capacity 500 to 2400 m3/hr (dry air generation) |
| |
| Dry Air capacity in m3/hr - 80 to 2400 |
| |
| Bin size in ltr. - 100 to 3000 |
• Continuous supply of dry air to the drying bin
• Closed loop system regeneration
• Optional of a PLC Control facility to monitor all dryer functions
• Machine mounted version
• Water based after cooler |
| |
| Technical Data |
Model |
LMD 80 |
LMD 120 |
LMD 250 |
Dry Air Capacity (m3/hr) |
80 |
120 |
250 |
Drying Temp (°C) |
160-180 |
160-180 |
160-180 |
Total Connected Load (kW)* |
7.8* |
10.9* |
14.5* |
Compressed air pressure (bar) |
- |
- |
5-7 |
Power supply |
|
415V, 50Hz, 3 Phase |
|
Specific Air Volume (m3/kg) |
2.5 |
2.5 |
2.5 |
Bin Capacity (liter) |
100 / 150 |
350 |
600 |
Maximum Throughout (kg/hr) |
16 / 20 |
48 |
85 |
Overall Dimension LxBxH (mm |
1303x850x2219 |
1450x859x2621 |
2000x1050x2450 |
Weight in kgs (approx) |
200 |
200 |
250 |
|
|
| Vacuum Loaders |
| |
| Models |
| HLE, HLB-E, HLB-ET, HBE 3/4, HLS, SSL06 |
| |
| Conveying Capacity - up to 800 kgs/hr |
| |
| Options available |
Unit with integral blower
System Loader With central blower
Unit with 3 phases, stand alone blower |
| |
| PLC controlled Proportioning valve |
| Automatic cleaning of filter after every cycle Models - PV dia 38/45/60 |
| Large discharge opening - Stainless steel construction |
| Alarm when material is not being conveyed - Can be integrated with L&T Hopper load |
| System loader HLS 02- HLS 75 liters - Online recycling of regrind material |
| |
| Technical Data |
| |
|
| Central Conveying System |
| |
Our Central Material Handling System are designed to suit customer needs in Injection, Blow Molding, Thermoforming, Extrusion and Blown Film Lines.
We provide complete conveying solutions – Storage Silo’s Debagging Station, Daybins, central Coupling Station, Blower Station, Dust filters, System Loaders, PLC Control and many other Taylor made units to suit customer needs. |
| |
| |
|
Mould temperature Control Unit |
| |
| Models |
| LT150 Water Oil |
| |
| Outlet temperature - 90°C with Water / Up to 150°C with Oil / Special 200°C with Oil |
| |
| Heat transfer fluid - Water/Oil |
| |
| Pump flow rate - 60 / 70 Ipm |
| |
• Insulated stainless steel tank
• PID based temperature controller
• Low fluid thermal load and small filling quantity
• Automatic level control to prevent dry running
• Leak stop feature
• Option: Auto water refill |
|
| Granulator |
| |
| Models |
| |
| Sprue Granulator |
LSG1 |
LSG5 |
| Feed throat size (mmxmm) |
200 × 150 |
420 × 200 |
| Through put in kg/hr |
20 – 30 |
50 – 80 (subject to size of component) |
| |
|
|
| Component Granulator |
LPG 32-30 |
|
| Feed throat size (mm × mm) |
320 × 300 |
|
| Throughput in kg/hr |
80 – 200 (subject to size of component) |
|
| |
|
|
• Scissor cutting action
• Sieves to select desired output 5mm/7mm
• Robust construction
• Safely switch for additional safely
• By using near Injection Moldings Machine along with Hopper Loader and proportioning valve, the spruces can be recycled in ‘Closed Loop’
|
Optional: Dust Separation system, Augurfeed System |
|
|
